DagLichtDesign
Home
Roof lanterns
For contractors About us
Inspiration
Regions
Contact Request a quote Bekijk deze site in het Nederlands
Costs and sizes

Roof lantern price per m2: why that figure misleads

A fair roof lantern price per m2 does not really exist.

  • Made to measure from 2 weeks
  • 10-year warranty
  • Installed in 1 day by our own team
Google-rating: 4.7★★★★★from 3 reviews
Build your quote

Put together your quote

A free, no-obligation quote tailored to you in five short steps. You get your price by email straight away.

Lean-to roof lantern on a flat roof Gable roof lantern on a flat roof Lean-toGable
Example of a lean-to roof lantern by DagLichtDesignExample of a wall-abutting lean-to roof lantern by DagLichtDesignExample of a gable roof lantern by DagLichtDesignExample of a hipped roof lantern by DagLichtDesignRoof lantern by DagLichtDesign seen from inside
Tap a type and the photo changes
12345
Step 1 of 5

Which roof lantern are you looking for?

Tap a type and you move straight on.

What are the dimensions?

The outside size of the opening or upstand, in centimetres. A good estimate is fine.

Which glazing would you like?

Tap your choice. Triple insulates best.

Installation or delivery only?

Tap your choice. Our own team installs it in 1 day.

Where should we send the quote?

You get your price by email straight away.

Free and no obligationDone in 1 minuteInstant price by email
The short answer

A fair roof lantern price per m2 does not really exist. A large part of the price is in fixed components such as the frame, the profiles, the connection and sometimes the upstand, and those do not grow with the glass area. That is why we give from-prices per roof type, from €1,854 for a mono-pitch, and you get a quote for your size within 24 hours.

Why a roof lantern price per m2 says little

For an extension or a dormer, a price per square metre is a familiar rule of thumb. If you look for a roof lantern price per m2, you come across figures that say little. A roof lantern is not a roll of glass you cut off by the metre, but a complete product with a frame, profiles, seals and, for some types, an upstand. Those parts are always there, whether the roof lantern is 1 metre or 4 metres wide.

The result: a small roof lantern is relatively expensive per m² and a large one relatively economical. Apply the m² price of a large roof lantern to a small opening and you estimate too low. The other way round, you estimate too high.

The fixed costs in every roof lantern

Look at what is in every roof lantern, regardless of size. The frame runs all the way round, timber on the inside with black aluminium on the glass outside. With a wall-abutting lean-to, the upstand and connection profiles for the wall type are included. A gable has a ridge and a drainage system in the bottom rails, a hipped roof lantern has corner profiles and concealed drainage. That is work and material that does not rise in step with the glass. How this appears in a quote is explained in the price structure of a roof lantern.

  • Frame and profiles all round, at every size
  • Upstand and connection profiles with a wall-abutting lean-to
  • Ridge, corner profiles and drainage on gable and hipped types
  • Seals all round, regardless of the glass area

Which square metre do you mean?

There is another reason a price per m² is confusing. Does it refer to the opening in the roof, or to the glass? With a sloping roof lantern the glass surface is slightly larger than the opening. At DagLichtDesign every roof type has a standard pitch of 8°. So with a price per m², always ask which measurement it refers to. Read the right pitch for a roof lantern.

The glass itself also differs per m². HR++ is standard. HR+++ triple glazing and the UV solar control versions cost more. A price per m² without a glass specification therefore says little. The difference between the two insulating units is in triple glazing or HR++.

How to compare quotes fairly

Compare quotes on content, not on a single figure. Check what each line includes. In our quotes HR++ and triple are shown side by side, with glass options, lead time and price. Installation is a separate line. An overview of total costs is in how much a roof lantern costs and per type, for example, in the price of a mono-pitch.

  • Same opening size and same pitch
  • Same glass: U-value, safety glass, coating
  • Frame: which material, and painted or in primer
  • Upstand and connection profiles included or not
  • Delivery, installation and lead time listed separately

Frequently asked questions

What does a roof lantern cost per m2?

There is no fair fixed amount. Fixed components such as frame, profiles and connection make a small roof lantern more expensive per m² than a large one. We work with from-prices per type and a made-to-measure quote within 24 hours.

Why is a large roof lantern cheaper per m²?

Because the fixed costs are spread over more glass. The frame runs all the way round and grows only slightly with the area. How the glass is divided at a large size is set out in the quote. See also with or without an intermediate bar.

What should I look for when comparing quotes?

Compare complete quotes for the same size, pitch and type of glass. Check whether the upstand, connection profiles and delivery are included. A lower price without those parts is often not cheaper.

Want to know what your roof lantern costs?

Send a photo or sketch with dimensions. Within 24 hours you receive a quote with glazing options, lead time and price.

Request a quote Get in touch

Read more

A quick quote in your inbox?

A few questions, a photo or the dimensions, and we will prepare a tailored quote. Prefer to call: +31 342 223 190.

Request a quote More information
Make a request